|
FOR MY LEVEL 3 PROJECT ONCE AGAIN THIS ROCKET WILL CARRY
2 MISSLE WORKS RRC2 ALTS ALSO A MISSLE WORKS TIMER FOR BACKUP
IT WILL ALSO HAVE THESAME CAMERA SETUP AS THE BIGDAWG
DID BUT THIS TIME IT SHOULD BE EVEN BETTER BECAUSE THIS ONE SHOULD
GO ABOUT 3 TIMES AS HIGH...THE BODY TUBE'S HAVE RECIEVD A FULL WRAP OF KEVLAR AND THEN A FULL WRAP OF 10 OZ FIBERGLASS ON
TOP....THE TUBES CAME OUT VERY SMOOTH AND REQUIRE VERY LITTLE SANDING...THE FIN CAN IS FIT TOGETHER AND GLASSED AND JUST WAITING
FOR THE FINISH SANDING DONE
well here it is all done and ready for its first flight, still want to do
the cert flight on a m1419 and with the video system but this time I want to do a downlink instead of haveing the camcorder
on board, so check back and I'll let you know how it goes...................UPDATE.....well I couldnt come up with the m1419
so I went with a hypertek m1010 and also used a video downlink system this time and it all worked great you can see some of
the stills from the video on my level 3 page
so as of August 30 I am a level 3 flyer
|
